| ppc405gp-cpc | 
| ppc405gp-ebc | 
| ppc405gp-emac | 
| ppc405gp-gpio | 
| ppc405gp-iic | 
| ppc405gp-mal | 
| ppc405gp-mc | 
| ppc405gp-pci | 
| ppc405gp-uic | 
| ppc440gp-cpc | 
| ppc440gp-dma | 
| ppc440gp-ebc | 
| ppc440gp-emac | 
| ppc440gp-gpio | 
| ppc440gp-iic | 
| ppc440gp-mal | 
| ppc440gp-mc | 
| ppc440gp-pci | 
| ppc440gp-plb | 
| ppc440gp-sram | 
| ppc440gp-uic | 
| ppc440gp-zmii | 
| i82461GX | 
| i82468GX_0 | 
| uPD66566S1016 | 
| i8042 | 
| floppy-drive | 
| i82077 | 
| i8237x2 | 
| i82443bx | 
| i82443bx_agp | 
| i8254 | 
| i8259x2 | 
| ADM1031 | 
| alpha-lx164-system | 
| south-bridge-saturn | 
| create-alpha-lx164-system | create a non-instantiated alpha-lx164-system | 
| create-south-bridge-saturn | create a non-instantiated south-bridge-saturn | 
| import-alpha-components | import a component collection | 
| alpha-ev5 | 
| alpha-ev5 | 
| Turbo_New_Code_Block | 
| load-rom | load a ROM image into memory. | 
| pfregs | deprecated — print floating point registers | 
| piprs | print internal processor registers | 
| read-ipr | read/write internal processor register | 
| write-ipr | write internal processor register | 
| AM29F016 | 
| AM79C960 | 
| AM79C960-dml | 
| AM79C973 | 
| apm | 
| arm-sa1110-system | 
| create-arm-sa1110-system | create a non-instantiated arm-sa1110-system | 
| import-arm-sa1110-components | import a component collection | 
| new-arm-sa1110-system | create an instantiated arm-sa1110-system | 
| armv5te | 
| armv5te | 
| artesyn-pm-ppc | 
| AT24C164 | 
| AT24CS256 | 
| BCM5703C | 
| BCM5704C | 
| bitmask-translator | 
| cassini | 
| cassini_sub | 
| central-client | 
| central-server | 
| connect-central | connect to Simics Central | 
| new-central-server | create a Simics Central server | 
| cheerio-e2bus | 
| cheerio-hme | 
| cheetah-plus-mmu | 
| cheetah-mmu | 
| CL-PD6729 | 
| clock | 
| consistency-controller | 
| context-switcher | 
| new-context-switcher | create new context switcher | 
| cpc700-gpt | 
| cpc700-iic | 
| cpc700-mc | 
| cpc700-pci | 
| cpc700-pi | 
| cpc700-uic | 
| cpu-group | 
| cpu-mode-tracker | 
| new-cpu-mode-tracker | create new cpu mode tracker | 
| CS8900A | 
| CY82C693_0 | 
| CY82C693_1 | 
| CY82C693_2 | 
| DEC21041 | 
| DEC21140A | 
| DEC21140A-dml | 
| DEC21143 | 
| DS12887 | 
| RTC_Nvram_Update | 
| DS12887-dml | 
| DS1621 | 
| DS1743P | 
| DS17485 | 
| RTC_Nvram_Update | 
| ebony-fpga | 
| empty-device | 
| etg | 
| ETG_New_Arp_Entry | 
| new-etg | Create an Ethernet traffic generator | 
| eth-transceiver | 
| ethernet-link | 
| Ethernet_Frame | 
| connect-real-network-bridge | connect bridge between real and simulated network | 
| connect-real-network-host | connect real host to the simulated network | 
| connect-real-network-router | connect router between real and simulated network | 
| disconnect-real-network | disconnect from the real network | 
| ethereal | run the ethereal program | 
| network-helper | set/show name of host network helper | 
| new-ethernet-link | create a new ethernet link | 
| pcapdump | save traffic in libpcap format | 
| tcpdump | run the tcpdump program | 
| FAS366U | 
| fc-disk | 
| FC_SCSI_Command | 
| enchilada-system | 
| south-bridge-sun-md1535d | 
| taco-system | 
| create-enchilada-system | create a non-instantiated enchilada-system | 
| create-south-bridge-sun-md1535d | create a non-instantiated south-bridge-sun-md1535d | 
| create-taco-system | create a non-instantiated taco-system | 
| fiesta-system | 
| fiesta-tomatillo | 
| file-cdrom | 
| new-file-cdrom | create new file-cdrom object | 
| flash-memory | 
| fourport | 
| frontend-server | 
| ftp-alg | 
| g-cache | 
| trans-sorter | 
| trans-splitter | 
| g-cache-ooo | 
| trans-sorter | 
| trans-splitter-ooo | 
| gdb-remote | 
| GDB_Stopped | 
| gdb-remote | start gdb-remote | 
| new-gdb-remote | create a gdb session | 
| GT64120 | 
| GT64120-pci | 
| host-cdrom | 
| new-host-cdrom | create new host-cdrom object | 
| hostfs | 
| i21150 | 
| i21152 | 
| i21554-prim | 
| i21554-scnd | 
| i21555-prim | 
| i21555-scnd | 
| i2c-bus | 
| ia64-460gx-system | 
| itanium-cpu | 
| create-ia64-460gx-system | create a non-instantiated ia64-460gx-system | 
| create-itanium-cpu | create a non-instantiated itanium-cpu | 
| import-ia64-components | import a component collection | 
| new-ia64-460gx-system | create an instantiated ia64-460gx-system | 
| ia64-itanium | 
| fpsr | print floating point status register | 
| interrupt-status | display interrupt status | 
| pfregs | print floating point registers | 
| rse-status | display RSE status | 
| tlb-status | display tlb status | 
| ia64-itanium2 | 
| ICS951601 | 
| id-splitter | 
| io-apic | 
| ISA | 
| isa-lance | 
| isa-vga | 
| pc-dual-serial-ports | 
| pc-floppy-controller | 
| pc-quad-serial-ports | 
| pc-single-parallel-port | 
| ps2-keyboard-mouse | 
| sio-lpc47m172 | 
| sio-w83627hf | 
| std-super-io | 
| create-isa-lance | create a non-instantiated isa-lance | 
| create-isa-vga | create a non-instantiated isa-vga | 
| create-pc-dual-serial-ports | create a non-instantiated pc-dual-serial-ports | 
| create-pc-floppy-controller | create a non-instantiated pc-floppy-controller | 
| create-pc-quad-serial-ports | create a non-instantiated pc-quad-serial-ports | 
| create-pc-single-parallel-port | create a non-instantiated pc-single-parallel-port | 
| create-ps2-keyboard-mouse | create a non-instantiated ps2-keyboard-mouse | 
| create-sio-lpc47m172 | create a non-instantiated sio-lpc47m172 | 
| create-sio-w83627hf | create a non-instantiated sio-w83627hf | 
| create-std-super-io | create a non-instantiated std-super-io | 
| ISP1040 | 
| ISP2200 | 
| jaguar-mmu | 
| jalapeno-mmu | 
| leon2-simple | 
| create-leon2-simple | create a non-instantiated leon2-simple | 
| import-leon2-components | import a component collection | 
| new-leon2-simple | create an instantiated leon2-simple | 
| leon2_cfg | 
| leon2_ioport | 
| leon2_irq | 
| leon2_timer | 
| leon2_uart | 
| opencores_eth | 
| linux-process-tracker | 
| new-linux-process-tracker | create new Linux process tracker | 
| local-space-mapper | 
| logical-memory-translator | 
| start-logical-memory-translator | start the logical memory translator on all cpus | 
| LX164-IRQ-PLD | 
| LX164-NVRAM | 
| M5823 | 
| RTC_Nvram_Update | 
| malta | 
| malta-system | 
| create-malta-system | create a non-instantiated malta-system | 
| import-malta-components | import a component collection | 
| MD1535D-acpi | 
| MD1535D-cfg | 
| MD1535D-ide | 
| MD1535D-isa | 
| MD1535D-power | 
| MD1535D-smb | 
| MD1535D-unknown | 
| ddr-memory-module | 
| ddr2-memory-module | 
| sdram-memory-module | 
| create-and-connect-ddr-memory | create and connect memory modules to the system | 
| create-ddr-memory-module | create a non-instantiated ddr-memory-module | 
| create-ddr2-memory-module | create a non-instantiated ddr2-memory-module | 
| create-sdram-memory-module | create a non-instantiated sdram-memory-module | 
| new-ddr-memory-module | create an instantiated ddr-memory-module | 
| new-ddr2-memory-module | create an instantiated ddr2-memory-module | 
| new-sdram-memory-module | create an instantiated sdram-memory-module | 
| microwire-eeprom | 
| mii-management-bus | 
| mii-transceiver | 
| mips-4kc | 
| mips-4kc | 
| MIPS_Processor_Reset | 
| new-branch-recorder | create a new branch recorder | 
| print-tlb | deprecated — print TLB contents | 
| mips-5kc | 
| mips-5kc | 
| MIPS_Processor_Reset | 
| MK48T08 | 
| msp430 | 
| generic-flash-memory | 
| niagara-dram-ctl | 
| niagara-iob | 
| niagara-l2c | 
| niagara-simple-system | 
| create-niagara-simple-system | create a non-instantiated niagara-simple-system | 
| new-niagara-simple-system | create an instantiated niagara-simple-system | 
| NS16450 | 
| NS16550 | 
| ooo_micro_arch | 
| open-pic | 
| panther-mmu | 
| pc-config | 
| pc-shadow | 
| PCF8582C | 
| PCF8584 | 
| PCF8587 | 
| pci-bus | 
| create-agp-voodoo3 | create a non-instantiated agp-voodoo3 | 
| create-pci-am79c973 | create a non-instantiated pci-am79c973 | 
| create-pci-backplane | create a non-instantiated pci-backplane | 
| create-pci-bcm5703c | create a non-instantiated pci-bcm5703c | 
| create-pci-bcm5704c | create a non-instantiated pci-bcm5704c | 
| create-pci-dec21041 | create a non-instantiated pci-dec21041 | 
| create-pci-dec21140a | create a non-instantiated pci-dec21140a | 
| create-pci-dec21140a-dml | create a non-instantiated pci-dec21140a-dml | 
| create-pci-dec21143 | create a non-instantiated pci-dec21143 | 
| create-pci-i21152 | create a non-instantiated pci-i21152 | 
| create-pci-i82543gc | create a non-instantiated pci-i82543gc | 
| create-pci-i82546bg | create a non-instantiated pci-i82546bg | 
| create-pci-isp1040 | create a non-instantiated pci-isp1040 | 
| create-pci-isp2200 | create a non-instantiated pci-isp2200 | 
| create-pci-pd6729 | create a non-instantiated pci-pd6729 | 
| create-pci-pmc1553-bc | create a non-instantiated pci-pmc1553-bc | 
| create-pci-rage-pm-mobility-pci | create a non-instantiated pci-rage-pm-mobility-pci | 
| create-pci-ragexl | create a non-instantiated pci-ragexl | 
| create-pci-sil680a | create a non-instantiated pci-sil680a | 
| create-pci-sym53c810 | create a non-instantiated pci-sym53c810 | 
| create-pci-sym53c875 | create a non-instantiated pci-sym53c875 | 
| create-pci-sym53c876 | create a non-instantiated pci-sym53c876 | 
| create-pci-vga | create a non-instantiated pci-vga | 
| create-pci-voodoo3 | create a non-instantiated pci-voodoo3 | 
| create-pcie-pex8524 | create a non-instantiated pcie-pex8524 | 
| create-pcie-pex8524-nt | create a non-instantiated pcie-pex8524-nt | 
| create-south-bridge-6300esb | create a non-instantiated south-bridge-6300esb | 
| create-south-bridge-amd8111 | create a non-instantiated south-bridge-amd8111 | 
| create-south-bridge-md1535d | create a non-instantiated south-bridge-md1535d | 
| create-south-bridge-piix4 | create a non-instantiated south-bridge-piix4 | 
| new-south-bridge-6300esb | create an instantiated south-bridge-6300esb | 
| PCI0646 | 
| pcie-switch | 
| perfanalyze-client | 
| memory-usage | memory usage | 
| simics-module-symbols | load module symbols from Simics | 
| phy-mii-transceiver | 
| create-phy-mii-transceiver | create a non-instantiated phy-mii-transceiver | 
| piix4_ide | 
| piix4_isa | 
| piix4_power | 
| piix4_usb | 
| piix4_usb_dummy | 
| pmppc-board | 
| create-pmppc-board | create a non-instantiated pmppc-board | 
| import-pmppc-components | import a component collection | 
| new-pmppc-board | create an instantiated pmppc-board | 
| ppc-broadcast-bus | 
| ppc-of | 
| ppc-simple | 
| create-ppc-simple | create a non-instantiated ppc-simple | 
| import-ppc-simple-components | import a component collection | 
| new-ppc-simple | create an instantiated ppc-simple | 
| ppc32-linux-process-tracker | 
| new-ppc32-linux-process-tracker | create new ppc32-linux process tracker | 
| ppc405gp | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc405gp | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc440gp | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ebony-board | 
| create-ebony-board | create a non-instantiated ebony-board | 
| import-ppc440gp-components | import a component collection | 
| new-ebony-board | create an instantiated ebony-board | 
| ppc440gp | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc440gx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc440gx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc603e | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc603e | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| pregs-fpu | print the floating point registers | 
| print-dtlb | deprecated — print data tlb contents | 
| print-itlb | deprecated — print instruction tlb contents | 
| ppc64-linux-process-tracker | 
| new-ppc64-linux-process-tracker | create new ppc64-linux process tracker | 
| ppc7400 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc7400 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| pregs-altivec | print cpu altivec registers | 
| ppc7447 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc7447 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc7450 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc7450 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc7457 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc7457 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc750 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc750 | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc750fx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc750fx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc750gx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc750gx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc970fx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc64_sfmode_change | 
| ppc970-simple | 
| create-ppc970-simple | create a non-instantiated ppc970-simple | 
| import-ppc970fx-components | import a component collection | 
| new-ppc970-simple | create an instantiated ppc970-simple | 
| ppc970fx | 
| PPC_Attention | 
| PPC_Processor_Reset | 
| PPC_TLB_Invalidate_Entry | 
| ppc64_sfmode_change | 
| pyxis | 
| ragexl | 
| rn-eth-bridge-raw | 
| rn-eth-bridge-tap | 
| rn-eth-proxy-raw | 
| rn-eth-proxy-tap | 
| rn-ip-router-raw | 
| rn-ip-tunnel-tun | 
| close-tun-tap-interface | close an unused persistent TUN/TAP interface | 
| recorder | 
| rev-execution | 
| Rexec_Limit_Exceeded | 
| clear-recorder | clear recorded events | 
| delete-bookmark | delete a time bookmark | 
| list-bookmarks | list time bookmarks | 
| reverse | run simulation backwards | 
| reverse-step-instruction | reverse step one or more instruction | 
| reverse-to | set a temporary time breakpoint and run backwards | 
| rexec-limit | tune reverse execution performance parameters | 
| set-bookmark | set a bookmark at the current point in time | 
| skip-to | skip to the specified point in the simulation | 
| rom-device | 
| SA1110-device | 
| sample-device | 
| sample-device-python | 
| sample-i2c-device | 
| sample-memhier | 
| sample_micro_arch | 
| sample_micro_arch_x86 | 
| sample-pci-device | 
| sapic-bus | 
| sb16 | 
| sbbc-pci | 
| sbus-hme | 
| scsi-bus | 
| scsi-cdrom | 
| SCSI_CDROM_Command | 
| scsi-disk | 
| SCSI_Disk_Command | 
| create-serengeti-3800-chassis | create a non-instantiated serengeti-3800-chassis | 
| create-serengeti-4800-chassis | create a non-instantiated serengeti-4800-chassis | 
| create-serengeti-4810-chassis | create a non-instantiated serengeti-4810-chassis | 
| create-serengeti-6800-chassis | create a non-instantiated serengeti-6800-chassis | 
| create-serengeti-cluster-chassis | create a non-instantiated serengeti-cluster-chassis | 
| create-serengeti-cpci4-board | create a non-instantiated serengeti-cpci4-board | 
| create-serengeti-pci8-board | create a non-instantiated serengeti-pci8-board | 
| create-serengeti-sp-cpci6-board | create a non-instantiated serengeti-sp-cpci6-board | 
| create-serengeti-us-iii-cpu-board | create a non-instantiated serengeti-us-iii-cpu-board | 
| create-serengeti-us-iii-plus-cpu-board | create a non-instantiated serengeti-us-iii-plus-cpu-board | 
| create-serengeti-us-iv-cpu-board | create a non-instantiated serengeti-us-iv-cpu-board | 
| create-serengeti-us-iv-plus-cpu-board | create a non-instantiated serengeti-us-iv-plus-cpu-board | 
| create-sun-cpci-hme-isp | create a non-instantiated sun-cpci-hme-isp | 
| create-sun-cpci-isp-isp | create a non-instantiated sun-cpci-isp-isp | 
| create-sun-cpci-qlc-qlc | create a non-instantiated sun-cpci-qlc-qlc | 
| new-serengeti-3800-chassis | create an instantiated serengeti-3800-chassis | 
| new-serengeti-4800-chassis | create an instantiated serengeti-4800-chassis | 
| new-serengeti-4810-chassis | create an instantiated serengeti-4810-chassis | 
| new-serengeti-6800-chassis | create an instantiated serengeti-6800-chassis | 
| new-serengeti-cluster-chassis | create an instantiated serengeti-cluster-chassis | 
| nvci | 
| serengeti-console | 
| serengeti-console-old | 
| serengeti-schizo | 
| serengeti-system | 
| serial-link | 
| new-serial-link | create a new serial link | 
| server-console | 
| Xterm_Break_String | 
| port-forward-incoming-server | 
| port-forward-outgoing-server | 
| service-node | 
| service-node-device | 
| connect-real-network | connect a simulated machine to the real network | 
| connect-real-network-napt | enable NAPT from simulated network | 
| connect-real-network-port-in | setup port forwarding to a simulated machine | 
| connect-real-network-port-out | setup port forwarding to real machine | 
| default-port-forward-target | set default port forwarding target | 
| disconnect-real-network-port-in | remove port forwarding to a simulated machine | 
| disconnect-real-network-port-out | remove port forwarding to real machine | 
| list-port-forwarding-setup | view the port forwarding setup | 
| new-service-node | create a new service node | 
| set-memory | 
| signal-bus | 
| branch_recorder | 
| component | 
| conf-object | 
| context | 
| data-profiler | 
| image | 
| log-object | 
| memory-space | 
| persistent-ram | 
| port-space | 
| preferences | 
| python | 
| ram | 
| rom | 
| sim | 
| top-component | 
| unresolved_object_class | 
| ! | execute a shell command | 
| != | not equal | 
| $ | get the value of an environment variable | 
| % | read register by name | 
| & | bitwise AND operation | 
| * | arithmetic multiplication | 
| + | arithmetic addition | 
| += | set an environment variable | 
| - | arithmetic subtraction | 
| -= | set an environment variable | 
| -> | access object attribute | 
| / | arithmetic division | 
| < | less than | 
| << | bitwise left shift | 
| <= | less or equal | 
| = | set an environment variable | 
| == | equal | 
| > | greater than | 
| >= | greater or equal | 
| >> | bitwise right shift | 
| @ | evaluate a Python statement | 
| [ | |
| ^ | bitwise XOR operation | 
| add-directory | add a directory to the Simics search path | 
| add-module-directory | add a directory to the module search path | 
| and | logical and | 
| api-apropos | search API help | 
| api-help | get API help | 
| apropos | search for text in documentation | 
| break | set breakpoint on current processor | 
| break-cr | break on control register updates | 
| break-exception | break on CPU exceptions | 
| break-hap | break on haps | 
| break-io | break on device accesses | 
| break-log | break on log message | 
| cd | change working directory | 
| clear-directories | clear the Simics search path | 
| command-list | generate html document describing commands | 
| connect-components | connect components | 
| copyright | print full Simics copyright information | 
| cpu-switch-time | get/set CPU switch time | 
| current-processor | return current processor | 
| cycle-break | set cycle breakpoint | 
| cycle-break-absolute | set absolute cycle breakpoint | 
| date | host time and date | 
| defined | variable defined | 
| delete | remove a breakpoint | 
| devs | list all devices in Simics | 
| digit-grouping | set output formatting for numbers | 
| dirs | display directory stack | 
| disable | enable/disable breakpoint | 
| disable-real-time-mode | disable real time mode for Simics | 
| disassemble | disassemble instructions | 
| disassemble-settings | change disassembly output settings | 
| display | print expression at prompt | 
| dstc-disable | disable D-STC | 
| dstc-enable | enable D-STC | 
| echo | echo a value to screen | 
| else | |
| enable | enable/disable breakpoint | 
| enable-real-time-mode | set real time mode for Simics | 
| expect | fail if not equal | 
| finish-function | finish the current function | 
| get | get value of physical address | 
| get-component-prefix | get current component name prefix | 
| help | help command | 
| hex | display integer in hexadecimal notation | 
| if | |
| ignore | set ignore count for a breakpoint | 
| instantiate-components | instantiate components | 
| instruction-fetch-mode | set or get current mode for instruction fetching | 
| instruction-profile-mode | deprecated — set or get current mode for instruction profiling | 
| interrupt-script-branch | |
| istc-disable | disable I-STC | 
| istc-enable | enable I-STC | 
| license | print simics license | 
| list-attributes | list all attributes | 
| list-breakpoints | print information about breakpoints | 
| list-classes | list all configuration classes | 
| list-components | list components | 
| list-directories | list directories in Simics search path | 
| list-failed-modules | list the modules that are not loadable | 
| list-hap-callbacks | print list of hap callbacks | 
| list-haps | print list of haps | 
| list-modules | list loadable modules | 
| list-namespaces | list all namespaces | 
| list-objects | list all objects | 
| list-script-branches | |
| list-vars | list environment variables | 
| load-binary | load binary (executable) file into memory | 
| load-file | load file into memory | 
| load-module | load module into Simics | 
| load-persistent-state | load persistent state | 
| log | print log entries for all objects | 
| log-level | set or get the global log level | 
| log-setup | configure log behavior | 
| log-size | set log buffer size | 
| log-type | set or get the current log types | 
| logical-to-physical | translate logical address to physical | 
| ls | list files | 
| magic-break-disable | remove magic instruction hap handler | 
| magic-break-enable | install magic instruction hap handler | 
| magic-break-query | returns 1 if magic instruction handler is installed | 
| max | max | 
| min | min | 
| module-list-refresh | create a new list of loadable modules | 
| native-path | convert a filename to host native form | 
| new-context | create a new context | 
| next-instruction | run to the next instruction, skipping subroutine calls | 
| next-line | run to the next source line, skipping subroutine calls | 
| not | logical not | 
| or | logical or | 
| output-file-start | send output to file | 
| output-file-stop | stop sending output to file | 
| output-radix | change the default output radix | 
| pdisable | switch processor off | 
| penable | switch processor on | 
| pid | print pid of Simics process | 
| pipe | run commands through a pipe | 
| popd | pop directory from directory stack | 
| pow | power of | 
| pregs | print cpu registers | 
| display integer in various bases | |
| print-directories | deprecated — print the directory Simics search path | 
| print-event-queue | print event queue for processor | 
| print-statistics | print various statistics | 
| print-time | print number of steps and cycles executed | 
| pselect | select a processor | 
| pstatus | show processors' status | 
| pushd | push directory on directory stack | 
| pwd | print working directory | 
| python | evaluate an expression in python | 
| quit | quit from Simics | 
| read-configuration | restore configuration | 
| read-reg | read a register | 
| readme | print information about Simics | 
| resolve-file | resolve a filename | 
| reverse-next-instruction | back to the previous instruction, skipping subroutine calls | 
| reverse-next-line | back to the previous source line, skipping subroutine calls | 
| reverse-step-line | back to the previous source line | 
| run | start execution | 
| run-command-file | execute a simics script | 
| run-cycles | start execution | 
| run-python-file | execute Python file | 
| save-component-template | save a component configuration template | 
| save-persistent-state | save persistent simulator state | 
| script-branch | |
| set | set physical address to specified value | 
| set-component-prefix | set a prefix for all component names | 
| set-context | set the current context of a CPU | 
| set-memory-limit | limit memory usage | 
| set-pattern | set an instruction pattern for a breakpoint | 
| set-pc | set the current processor's program counter | 
| set-prefix | set a syntax prefix for a breakpoint | 
| set-simics-id | deprecated — set the global Simics ID number | 
| set-substr | set a syntax substring for a breakpoint | 
| signed | interpret unsigned integer as signed | 
| signed16 | interpret unsigned integer as signed | 
| signed32 | interpret unsigned integer as signed | 
| signed64 | interpret unsigned integer as signed | 
| signed8 | interpret unsigned integer as signed | 
| stc-status | show I- and D-STC status | 
| step-break | set time breakpoint | 
| step-break-absolute | set absolute time breakpoint | 
| step-cycle | step one or more cycles | 
| step-cycle-single | step one cycle and switch to the next cpu | 
| step-instruction | step one or more instructions | 
| step-line | run to the next source line | 
| stop | interrupt simulation | 
| sum | deprecated — sum a memory range | 
| trace-breakpoint | trace breakpoints | 
| trace-cr | trace control register updates | 
| trace-exception | trace exceptions | 
| trace-hap | trace haps | 
| trace-io | trace device accesses | 
| unbreak | remove breakpoint range | 
| unbreak-cr | break on control register updates | 
| unbreak-exception | break on CPU exceptions | 
| unbreak-hap | break on haps | 
| unbreak-io | break on device accesses | 
| uncall-function | go back to when the current function was called | 
| undisplay | remove expression installed by display | 
| unload-module | unload module | 
| unset | remove a environment variable | 
| untrace-breakpoint | trace breakpoints | 
| untrace-cr | trace control register updates | 
| untrace-exception | trace exceptions | 
| untrace-hap | trace haps | 
| untrace-io | trace device accesses | 
| version | display Simics version | 
| wait-for-hap | wait until hap occurs | 
| wait-for-variable | wait for a variable to change | 
| while | |
| write-configuration | save configuration | 
| write-reg | write to register | 
| x | examine raw memory contents | 
| | | bitwise OR operation | 
| ~ | bitwise not | 
| simple-byte-dump | 
| SIO82378ZB | 
| sparc-irq-bus | 
| leon2 | 
| leon2 | 
| ultrasparc-t1 | 
| pregs-hyper | print hypervisor registers | 
| ultrasparc-t1 | 
| pregs-all | print all cpu registers | 
| pregs-hyper | print hypervisor registers | 
| print-double-regs | deprecated — print floating point registers as doubles | 
| print-float-regs | deprecated — print floating point registers | 
| print-float-regs-raw | deprecated — print raw floating point register contents | 
| read-fp-reg-i | print floating point single register as integer | 
| read-fp-reg-x | print floating point double register as integer | 
| trap-info | print information about current traps | 
| write-fp-reg-i | write floating point single register as integer | 
| write-fp-reg-x | write floating point double register as integer | 
| ultrasparc-ii | 
| store_queue | 
| ultrasparc-ii | 
| ultrasparc-ii | 
| ultrasparc-iii | 
| ultrasparc-iii-i | 
| ultrasparc-iii-plus | 
| store_queue | 
| ultrasparc-iii | 
| ultrasparc-iii-i | 
| ultrasparc-iii-plus | 
| ultrasparc-iii | 
| ultrasparc-iii-i | 
| ultrasparc-iii-plus | 
| ultrasparc-iv | 
| ultrasparc-iv-plus | 
| ultrasparc-iv | 
| ultrasparc-iv-plus | 
| spitfire-mmu | 
| state-assertion | 
| state-assertion-connect | connect to a state-assertion receiver | 
| state-assertion-create-file | record a state assertion file | 
| state-assertion-open-file | open a state assertion file for comparing | 
| state-assertion-receive | wait for a connection from a state assertion sender | 
| state-assertion-simple-assert | assert the file | 
| state-assertion-simple-record | record the state of an object every x steps | 
| create-dummy-component | create a non-instantiated dummy-component | 
| create-simple-fc-disk | create a non-instantiated simple-fc-disk | 
| create-std-etg | create a non-instantiated std-etg | 
| create-std-ethernet-link | create a non-instantiated std-ethernet-link | 
| create-std-graphics-console | create a non-instantiated std-graphics-console | 
| create-std-host-serial-console | create a non-instantiated std-host-serial-console | 
| create-std-ide-cdrom | create a non-instantiated std-ide-cdrom | 
| create-std-ide-disk | create a non-instantiated std-ide-disk | 
| create-std-ms1553-link | create a non-instantiated std-ms1553-link | 
| create-std-pcmcia-flash-disk | create a non-instantiated std-pcmcia-flash-disk | 
| create-std-scsi-bus | create a non-instantiated std-scsi-bus | 
| create-std-scsi-cdrom | create a non-instantiated std-scsi-cdrom | 
| create-std-scsi-disk | create a non-instantiated std-scsi-disk | 
| create-std-serial-link | create a non-instantiated std-serial-link | 
| create-std-server-console | create a non-instantiated std-server-console | 
| create-std-service-node | create a non-instantiated std-service-node | 
| create-std-text-console | create a non-instantiated std-text-console | 
| create-std-text-graphics-console | create a non-instantiated std-text-graphics-console | 
| import-isa-components | import a component collection | 
| import-memory-components | import a component collection | 
| import-pci-components | import a component collection | 
| import-phy-components | import a component collection | 
| import-std-components | import a component collection | 
| import-timing-components | import a component collection | 
| import-usb-components | import a component collection | 
| new-dummy-component | create an instantiated dummy-component | 
| new-std-etg | create an instantiated std-etg | 
| new-std-ethernet-link | create an instantiated std-ethernet-link | 
| new-std-graphics-console | create an instantiated std-graphics-console | 
| new-std-host-serial-console | create an instantiated std-host-serial-console | 
| new-std-ms1553-link | create an instantiated std-ms1553-link | 
| new-std-pcmcia-flash-disk | create an instantiated std-pcmcia-flash-disk | 
| new-std-serial-link | create an instantiated std-serial-link | 
| new-std-server-console | create an instantiated std-server-console | 
| new-std-service-node | create an instantiated std-service-node | 
| new-std-text-console | create an instantiated std-text-console | 
| new-std-text-graphics-console | create an instantiated std-text-graphics-console | 
| strata-flash | 
| sun-pci-ce | 
| sun-pci-hme | 
| sun-pci-hme-isp | 
| sun-pci-pgx64 | 
| sun-pci-qlc | 
| sun-pci-qlc-qlc | 
| sun-type5-keyboard | 
| sun-type5-mouse | 
| create-sun-pci-ce | create a non-instantiated sun-pci-ce | 
| create-sun-pci-hme | create a non-instantiated sun-pci-hme | 
| create-sun-pci-hme-isp | create a non-instantiated sun-pci-hme-isp | 
| create-sun-pci-pgx64 | create a non-instantiated sun-pci-pgx64 | 
| create-sun-pci-qlc | create a non-instantiated sun-pci-qlc | 
| create-sun-pci-qlc-qlc | create a non-instantiated sun-pci-qlc-qlc | 
| create-sun-type5-keyboard | create a non-instantiated sun-type5-keyboard | 
| create-sun-type5-mouse | create a non-instantiated sun-type5-mouse | 
| import-fiesta-components | import a component collection | 
| import-niagara-simple-components | import a component collection | 
| import-serengeti-components | import a component collection | 
| import-sun-components | import a component collection | 
| import-sunfire-components | import a component collection | 
| new-sun-type5-keyboard | create an instantiated sun-type5-keyboard | 
| new-sun-type5-mouse | create an instantiated sun-type5-mouse | 
| sun-keyboard | 
| sun-mouse | 
| sun4u-fasdma | 
| sun4v-rtc | 
| sun-sbus-fas-hme | 
| sunfire-3500-backplane | 
| sunfire-4500-backplane | 
| sunfire-6500-backplane | 
| sunfire-cpu-board | 
| sunfire-pci-board | 
| sunfire-sbus-board | 
| create-sun-sbus-fas-hme | create a non-instantiated sun-sbus-fas-hme | 
| create-sunfire-3500-backplane | create a non-instantiated sunfire-3500-backplane | 
| create-sunfire-4500-backplane | create a non-instantiated sunfire-4500-backplane | 
| create-sunfire-6500-backplane | create a non-instantiated sunfire-6500-backplane | 
| create-sunfire-cpu-board | create a non-instantiated sunfire-cpu-board | 
| create-sunfire-pci-board | create a non-instantiated sunfire-pci-board | 
| create-sunfire-sbus-board | create a non-instantiated sunfire-sbus-board | 
| sun4u-ac | 
| sun4u-clockregs | 
| sun4u-counter | 
| sun4u-fhc | 
| sun4u-sbus-speed | 
| sun4u-simm-status | 
| sun4u-systemregs | 
| sun4u-temperature | 
| sun4u-trans2 | 
| sunfire-psycho | 
| sunfire-sysio | 
| sunfire-system | 
| niagara-core-mmu | 
| niagara-strand-mmu | 
| MMU_Context_Register_Write | 
| MMU_Data_TLB_Demap | 
| MMU_Data_TLB_Map | 
| MMU_Instruction_TLB_Demap | 
| MMU_Instruction_TLB_Map | 
| MMU_Register_Write | 
| SYM53C810 | 
| SYM53C875 | 
| perfanalyze | 
| symtable | 
| down | go down N stack frames | 
| frame | change current stack frame | 
| function-profile | list functions sorted by profile counts | 
| list | list source and/or disassemble | 
| new-symtable | create new symbol table | 
| pos | address of line or function | 
| psym | print value of symbolic expression | 
| select-profiles | set profilers to display in source listing | 
| stack-trace | display stack trace | 
| symval | evaluate symbolic expression | 
| up | go up N stack frames | 
| whereis | find symbol by address | 
| telos-basic-clock | 
| telos-button | 
| telos-environment | 
| telos-io-ports | 
| telos-sfr | 
| telos-timer | 
| telos-usart | 
| telos-mote | 
| create-telos-mote | create a non-instantiated telos-mote | 
| import-telos-mote-components | import a component collection | 
| new-telos-mote | create an instantiated telos-mote | 
| sample-gcache | 
| sample-ma-model | 
| sample-ooo-model | 
| sample-x86-ma-model | 
| create-sample-gcache | create a non-instantiated sample-gcache | 
| create-sample-ma-model | create a non-instantiated sample-ma-model | 
| create-sample-ooo-model | create a non-instantiated sample-ooo-model | 
| create-sample-x86-ma-model | create a non-instantiated sample-x86-ma-model | 
| new-sample-gcache | create an instantiated sample-gcache | 
| new-sample-ma-model | create an instantiated sample-ma-model | 
| new-sample-ooo-model | create an instantiated sample-ooo-model | 
| new-sample-x86-ma-model | create an instantiated sample-x86-ma-model | 
| base-trace-mem-hier | 
| trace-mem-hier | 
| new-tracer | create a new tracer | 
| trans-staller | 
| v9-sol9-idle-opt | 
| v9-sol9-idle-opt | enable idle loop optimization | 
| vga | 
| vga_pci | 
| voodoo3 | 
| voodoo3-agp | 
| wire | 
| gfx-console | 
| Gfx_Break_String | 
| x86-486sx | 
| x86-486sx | 
| Core_Interrupt_Status | 
| Core_Mode_Switch | 
| Core_Pseudo_Exception | 
| X86_Descriptor_Change | 
| X86_Enter_SMM | 
| X86_Leave_SMM | 
| X86_Processor_Reset | 
| create-i386-cpu | create a non-instantiated i386-cpu | 
| create-i486dx2-cpu | create a non-instantiated i486dx2-cpu | 
| create-i486sx-cpu | create a non-instantiated i486sx-cpu | 
| create-legacy-pc-devices | create a non-instantiated legacy-pc-devices | 
| create-north-bridge-443bx | create a non-instantiated north-bridge-443bx | 
| create-north-bridge-443bx-agp | create a non-instantiated north-bridge-443bx-agp | 
| create-north-bridge-875p | create a non-instantiated north-bridge-875p | 
| create-north-bridge-e7520 | create a non-instantiated north-bridge-e7520 | 
| create-north-bridge-k8 | create a non-instantiated north-bridge-k8 | 
| create-opteron-cpu | create a non-instantiated opteron-cpu | 
| create-pentium-4-cpu | create a non-instantiated pentium-4-cpu | 
| create-pentium-4e-2ht-cpu | create a non-instantiated pentium-4e-2ht-cpu | 
| create-pentium-4e-4ht-cpu | create a non-instantiated pentium-4e-4ht-cpu | 
| create-pentium-4e-cpu | create a non-instantiated pentium-4e-cpu | 
| create-pentium-cpu | create a non-instantiated pentium-cpu | 
| create-pentium-ii-cpu | create a non-instantiated pentium-ii-cpu | 
| create-pentium-iii-cpu | create a non-instantiated pentium-iii-cpu | 
| create-pentium-m-cpu | create a non-instantiated pentium-m-cpu | 
| create-pentium-mmx-cpu | create a non-instantiated pentium-mmx-cpu | 
| create-pentium-pro-cpu | create a non-instantiated pentium-pro-cpu | 
| create-x86-apic-bus-system | create a non-instantiated x86-apic-bus-system | 
| create-x86-apic-system | create a non-instantiated x86-apic-system | 
| create-x86-e7520-system | create a non-instantiated x86-e7520-system | 
| create-x86-hammer-cpu | create a non-instantiated x86-hammer-cpu | 
| create-x86-separate-mem-io-system | create a non-instantiated x86-separate-mem-io-system | 
| create-x86-system | create a non-instantiated x86-system | 
| create-xeon-prestonia-cpu | create a non-instantiated xeon-prestonia-cpu | 
| import-x86-components | import a component collection | 
| x86-hammer | 
| store_queue | 
| x86-hammer | 
| Core_Interrupt_Status | 
| Core_Mode_Switch | 
| Core_Pseudo_Exception | 
| X86_Descriptor_Change | 
| X86_Enter_SMM | 
| X86_Leave_SMM | 
| X86_Processor_Reset | 
| x86-hammer | 
| x86-linux-process-tracker | 
| new-x86-linux-process-tracker | create new x86-linux process tracker | 
| x86-p2 | 
| x86-p2 | 
| Core_Interrupt_Status | 
| Core_Mode_Switch | 
| Core_Pseudo_Exception | 
| X86_Descriptor_Change | 
| X86_Enter_SMM | 
| X86_Leave_SMM | 
| X86_Processor_Reset | 
| x86-p4 | 
| store_queue | 
| x86-p4 | 
| Core_Interrupt_Status | 
| Core_Mode_Switch | 
| Core_Pseudo_Exception | 
| X86_Descriptor_Change | 
| X86_Enter_SMM | 
| X86_Leave_SMM | 
| X86_Processor_Reset | 
| x86-p4 | 
| x86-reset-bus | 
| x86-tlb | 
| TLB_Fill_Data | 
| TLB_Fill_Instruction | 
| TLB_Invalidate_Data | 
| TLB_Invalidate_Instruction | 
| TLB_Miss_Data | 
| TLB_Miss_Instruction | 
| TLB_Replace_Data | 
| TLB_Replace_Instruction | 
| x87_exception | 
| text-console | 
| Xterm_Break_String | 
| Z8530 | 
| Z8530-port |